
Add to Cart
High Precision Super Reliable Light Steel Solar Panel Mounting Brackets
Datasheet of High Precision Super Reliable Light Steel Solar Panel Mounting Brackets
SPECIFICATION | |||||
Description | Ground mounting | Roof bracket | Carport | Agricultural bracket | Single column stand |
Field status | open area | ||||
Max wind load | ≤60m/s | / | <46m/s | <46m/s | ≤46m/s |
Height | Depending | ||||
Snow load | Depending | ||||
Tilt Angle | 0~45° | As per requirement | 0~45° | 0~30° | 0~45° |
Mount Directions | Vertical,horizontal | ||||
Standard | GB/T2518-2008 & GB/T10125-2012 | ||||
Body material | S550GD+Z350 | ||||
Bolt material | SUS304 | ||||
Base material | Q235/Cement | ||||
Surface treatment | Galvanized mg-al | ||||
Warranty | 10 Years |
Strong Corrosion Resistance.
Ground screw foundation and concrete foundation can be acceptable
Parts have been high pre-assembly on factory to save your installation time
Simple and fast installation
High quality galvanized steel material
Quick delivery
1. SGS720H salt test report
2. TUV and ISO certified
3. Mass production capbility
4. Rich experience in mega project management
5. Good relation with famous industry suppliers
-Light steel structure profile production lines
-Finished steel profile
-Test method: GB/T10125-2012-Sample placement: 15°~25° with vertical direction
-Settlement salt solution concentration: (50+/-5) g/l NaCl
-Temperature inside the test chamber: (35+/-2) ºC
-Settlement rate of salt spray: 1~2ml (80cm2.h)
-Settlement salt solution pH value (25ºC+/-2ºC): 6.5~7.2-Exposure time: 720 hours (check once every 96 hours)
-Cleaning method: natural dry for 0.5~1.0 hours, then rinse with water of temperature not higher than 40ºC, then dry immediately.